If the motorcycle helmet lens is flat, the waterproof film of the car rearview mirror can be attached. If it’s curved, you can spray rain repellant or hydrophobic agent before going out in the rain. You can also wax and waterproof the lens, and apply a layer of wax, which can effectively reduce the adhesion of rainwater, because the density of wax is generally 0.8-0.95, which is higher than the density of water. In addition, when the speed exceeds 85km, there will be no water on the helmet lens, but high-speed driving in rainy days is not recommended. For safety, try not to go out when it rains.
fogging solution
1. Glass anti-fogging agent
Clean the surface first, then dry the mirror surface with a soft cloth such as gauze, spray the anti-fog agent evenly on the glass, wipe it evenly with a special anti-fog paper towel, and then dry it naturally.
2. glass water
It can be used after diluting with purified water. After wiping with a tissue, the mirror surface will form a waterproof coating, which can effectively protect the lens glass, reduce fogging, and effectively improve transparency and brightness.
3. Anti-fogging agent
After the motorcycle helmet glass is clean and dry, apply anti-fog agent or spray, just paint the inner wall and wait for it to dry. Wipe with clean water for two seconds, take it out and dry, the purpose is that water can increase the affinity of the anti-fog agent to the lens. After drying, if there are any marks, you can gently wipe it with a lens cloth.
Post time: Mar-24-2022